Reply to "Mind Train Headers"

Yes! To Pant4714, your inlets are 2 1/2" O.D.!! Remember when dealing with tubing and pipe, we ALWAYS (most of the time) work with the I.nside D.iameter. so your intake I.D. would be darn near the 2 1/4" of the tubing! Then a pro would just expand the tubing for such a perfect fit, it would "Scare You"! One more thing! They did NOT weld-on a cone onto the end of the tubing, at the header flange; they expanded the end of the tubing into a cone (near the diameter of the collector), and welded the tubing onto a flange!! Making for a very clean looking and unristrictive connection! If you want this, you must speak up and ask for it, but these guys did this on their own. See what I mean about paying a little extra to have a Professional do your work. These guys were true artists and proud of their work; and they knew a lot of people were going to ask, constantly, who did the job. And we all know these cars turn all the heads, and the rear end is all most of them are ever going to see. Regards, Marlin.

[This message has been edited by MARLIN JACK (edited 10-26-2003).]

[This message has been edited by MARLIN JACK (edited 10-26-2003).]