Reply to "missing pieces"

Jim (Guest)

The 11mm X 1.25 discussion has come up a couple of times on the deTomaso list. I never found any listing of an 11mm. I came to believe in the 11mm when I had to use a metric wrench to take 3 of the bolts out of my half shafts. (The rest were 7/16-20)

Major diameter of an 11mm falls right in the middle of the range for 7/16. The thread charts list 7/16 as 0.4281" to 0.4362", 11mm would be 0.4331". 1.25mm pitch is 20.25 threads per inch.

Think you could tell the difference without a comparator?

6/15/0410:01 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...