Reply to "MME ENGINE FAILURE UPDATE"

v8capriMember

Not that I want to get involved, but springs do soften when they run in. so if they were 280 new, they will soften to that.
May be important to know the 'over the nose' pressure, should be around 700+
if the pushrods were wrong length were they hitting the arms ? ( the sides of the pushrods)
The shorter installed height is not so important as long as the srings are not bottoming out.
Moly retainers ? or titanium ?
I would think a titanium retainer should be a good fit.more importantly than a moly ( harder) retainer.

10/14/084:33 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...