Skip to main content

Reply to "More on Front Caster"

Thanks for the replies. The affect of more caster is appreciated and understood.

Just wanted to know if there was any noticeable change in the position of the wheel (center of wheel goes 3/8" rearward) in the wheel well or clearance issues induced by the mod. Sort of depends on front wheel size and ride height.

I have 265/35/ZR18 front, fairly low ride height for the street, and steel GTS flares. Could increase ride height if necessary but am pretty tight clearancewise as it currently sits. The flares were hung the centered on the wheels. Suppose in theory you could move top ball joint 3/8" rearward and bottom 3/8" forward to achieve same result but a lot more work to mod lower A-Arm too, especially if not necessary. -Probably overthinking this.

Kelly
×
×
×
×