My neighbor has this motor for sale. Since the the machine work is all done I was considering using this motor and making it a stroker motor. Obviously the heads I'll preobably sell off and the stock ford parts and the meier racing pan or trade it to mustang guys...not gonna use those. but for the price...about $600 I figure I'd be ableto put together something like the MME motor on a budget over the summer. here are the specs. Keep in mind I plan to go with aluminum heads and I want roughly the same HP neighborhood as the MME crate motor that I cannot afford at the moment.
1970 Cleveland 4V motor 1200 miles on a rebuild that went into a kit car.
Keith Black Forged flat top pistons 9.5:1
Internally Balanced rotating assembly
Beam polished rods
Arp rod bolts,ARP main cap bolts
Double row timing chain
Crane HP cam .550 lift with about 260 advertised, bleed down lifters, springs, retainers
Closed chamber heads DOAE
Maier 8 qt. oil pan
Heavy duty oil pump
Block was bored 030 over Align bored Block surfaced All new bearings installed
Heads surfaced New guides installed
Seats ground Valve guide seals
Stock carburetor Stock 4v manifold, iron
What do you all think? I also have a stockpile of cleveland hipo goodies that will go in it thinking a solid roller cam and roler rockers. will stud girdles fit under FMS valve covers? Thanks.
Ryan
Original Post