The washers should go against the bolt head and nut. The rubber parts should register into the smaller diameter openings of the castings.
Note that the lower castings have a left and right. The upper parts are identical. Look at the photo of the right side mount, and note the fwd bias of the hole position. It would be easy to get this mixed up if the mounts were removed from the frame.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.