Reply to "MR2 Rack in Pantera"

bosswrenchMember

Never looked at the T-bird. What controls the valve? If its electronic, you're back to square 1. Some guys have had luck in adapting mismatched parts by putting a needle valve in the pressure line to reduce pressure, but that seems to shorten pump/seal life.
FYI- these are racing units so none of the non-vendor hydraulic throwouts work on a ZF without considerable lathe work. The vendors either make an adjustable height mount that fits inside a commercial unit or adapt a whole custom nose section to allow it to fit. Installed free clearance is THE big thing. Unless the system is rigid and has around 1/8" of free play when hot, hydraulic throwout seal life will be measured in hours.

11/23/029:21 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...