Reply to "My clutchingless engagement"

bosswrenchMember

snip.... I took the transaxle out today, and the throw out bearing is fine & still attached with the clip to the clutch arm. Does the car being a pushbutton, aluminum flywheel, dash 1 have anything to do with it?Thanks!!

Yes- definately. On aluminum flywheels, the flange that attaches to the crank is thgicker to gain some strength back. On a few alum flywheels I've seen, the extra thickness pushes the clutch surface closer to the tranny. To fix, remove the hydraulic bellcrank and move it a few splines, then reattach.

4/28/047:20 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...