Reply to "Need a whole front clip"

panteradougMember

I don't care how good the body guy is, this is just going to need a jig along the lines of the factory jig to get it straight.

I would not be shocked if the entire monococ is tweaked to the side and either up or down. You may be able to pull it out but the question is whether or not it will stay there. One bump in the road and it will pop back.

Even so, we are talking laser lines to precise center points. Even if you have the machine for it, it will tie the machine up for months. I'm thinking that it has to be on the machine just to reset the post and the fenders while you weld them.

I think that now, this car is just a parts car donor. I'm sad too.

Larry's car was child's play by comparison. It was hit straight on, not on the angle this one was.

8/26/235:37 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...