Reply to "NEED HELP 351C won't run after new cam"

marlinjackThe Machinist #5723 AMARGOSA MACHINE 'Running on Empty- Middle of Nowhere'

...Yes, the Ground cable that would go to the Engine Block. at or near the Starter Motor. That's where I put it. When You wired up the Ignition according to the Instructions, I'll bet it's correct!

One more thing...If the Fuel Pump is NOT Pumping Fuel, did the Mechanic Remember to re-Install the Pumps' 'Excentric Cam' Back Onto the face of the Cam Drive Sprocket?
If this should be the case, then just plumb-in a Electric Fuel Pump.

There are 2 'TDC's!! The WRONG one is at the top of the Exhaust Stroke!! You Want it at the top of the Compression Stroke! Check it with a Finger in the #1 Spark Plug Hole!!
You will feel the Pressure as Both Valves will be Closed.
Only THEN, is the Rotor pointed at the #1 Plug Terminal!

8/14/158:47 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...