Reply to "New Tubular Control Arms"

Gary-Mi (Guest)

$100 would be a bare piece. The fabricator said that it would be approx 1-1/2 hours labor, at $55/hour, plus material for each unit. Which I thought was fair. It may be less if I ordered 10 of each, but I don't have that kind of money.

As far as the upper rear, I am going to have some made, but I was going to use an American type ball joint, and fixed rear ends. I don't think you need the adjustment on that arm, since you can adjust the lower to get your camber. I have seen them before and that was how they were made. What do you do about the bolt thru the tapered hole, with the heim joint?

8/6/013:04 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...