Hello,
First off, Im a newbie, I'm sure that you guys have heard these questions all before. I'm new to the Pantera world. Ibought a 74 grabber blue Pantera and i have began a full restoration on the vehicle.
I have some questions, first before i ask, Thank you all in advance for you answers and advise. It wil be well read and take in use, Thanks again,
What are the current thoughts and experiences with Alkinline/chemical /dipping of the body or shell. would like to do this once and correctly, seems like the car is rusting from the inside out as i do understand that is a common concern. the innner and outer rockers are really bad. the rear wheel house at the back glass area, in the rear wheel wells at the front, vertical supports, not the control arm rails, but the doors, hood, roof hatch floors are great, so is the thr front and core support, car has 24,000 miles on the odometer.
were is the best place to get repair panels,
Does some one reproduce the Correct tire
pressure decal with correct paper, information.
passenger door opening, I can have this done very easily,
what is the deal with body or shell numbers, where are they located and what info is soo important from one to another, Bob
bobboss351@charter.net
Original Post