Reply to "No Start Problem"

jb1490Member

Measure the battery voltage. If less than 12 volts, charge (or replace) the battery. If you have a standard ignition (not an aftermarket ignition), connect a volt meter to the positive terminal of the coil & to ground. Turn the ignition switch to the run position & read the voltage. Next, read the volt meter while cranking the engine. If the voltage reading drops significantly, you have an electrical problem. The early cars had a relay in the ignition circuit. It is located above the right side foot well.

12/7/0811:33 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...