quote:I didn't see Meziere listing an inline pump.
Larry,
Meziere have a section of 'remote' (i.e. non block mount) electric water pumps or are you looking specifically for an inline flow through design?
Generally the high flow mechanical pumps are rated around 35 gpm I believe, but I'm not sure at what rotational speed (i.e. rpm) that 35 gpm rating is? An electric unit putting out out 55 gpm, should aid in cooling at both speed and at idle as it's independent of engine rpm.
For a remote application on a std block you should be able to take an old std mechanical water pump and remove the impeller (or if you have a Ford Motorsport one it's probably fallen off anyway
) and seal over the bearing end to form a flow through cavity.I guess in theory you could also leave the std unit in place and use a remote electrical pump as a booster?
Julian