Reply to "Oil pan size?"

Thanks guys! I figured it was a 10qt, but you never know about these modified cars, as the specs on the car didn't indicate pan size. I was mainly thinking the entry point of the stick into the pan may be at a different level than a stock pan, or the tube was different or the stick different length, or pan size less than 10qt. I will add another quart and mark it (which would be 9&1/2). Actually I don't need to mark it, as at that level the oil goes onto the ribbed part of the stick. From the info it looks like Hall just fabricated a 10qt pan from a stock pan, so entry level of the stick into the pan would be the same. Now I need to check on getting a different tube and/or stick because for some reason it gets kind of rusty at the top of the inner tube/stick. When I get under the lift I will see if there is some way of getting at the tube connection to the pan.