Reply to "Oil pressure gage again"

tomkuesterMember

I have used Lemans850i's solution to testing where the problem is with my oil pressure gauge not giving me a reading. The gauge works and the wire to the gage is good, but there no signal from my brand-new sending unit. I also checked to make sure that the sending unit is getting connection to ground. So, either it's no good or I ordered a wrong sending unit. Can anybody point me at a correct sending unit that works with the Pantera gauge? I used 1972 Ford Mustang 351C as my starting point. I can't imagine that this is too far off, but it must be, or I have bad luck.

Helpless in Virginia

3/4/252:48 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...