Reply to "Oil Pressure Sender Woes"

leeaMember

Mike for the other part of your question--no, there is no separate regulator only for the gauges, the only regulator is the Bosch unit on the right engine wall. If you wanted to put in a 12v regulator, the total current to each gauge is probably about 100mA each (the Veglia meters themselves are about 100-120ohms, so with 4 gauges using current sensing then figure 12v/25ohms so less than 0.5amp reliably). Of course, a linear regulator at 12v is going to provide maybe 10% less than the gauges ran at before, but who knows if this makes them any less accurate

. Fyi, see an article by Bill Taylor on www.panteraplace.com/page205.htm, or Pantera-electronics.com --Lee

4/13/184:53 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...