New Motor mounts. Had to buy 12 to get 2....so will have a few extra sets to get rid of!!! Bought stainless nylock nuts, and hardened washers for backing up the nuts. 12MM studs, 1.185" (30MM) tall. 500lbs rating on each.
More later...
OK, it's later! (6-30-09) After digging into the material these mounts are constructed of, I found out that their temp rating is far lower than what I would feel comfortable using or selling to anyone else. Something like 140F, 160F max short term. Having a 195F-ish degree engine(core temp) and headers passing down about 4-6 inches away.....I don't think so. Am working on having these remade with something that is more like 240F tolerant plus much better resistance to oil and gas exposure.
Does anyone have a new original mount handy??? Even a toasted original may be good just to be sure that I am not chasing down a wild goose trail! Hah! These are 1-1/8" thick but I would just like to know how thick the originals were....
Anyone need some HD vibration isolators for some heavy equipment? I have some I can turn loose!!!
UPDATED 11-15-09 I have new nitrile rubber mounts now in stock...they look just like these, but are a better suited rubber for exposure to high heat, gas fumes, oil, and grease. See my posting in the Goose for sale forum for more info on purchasing a set of these!
Steve
Attachments
Images (2)
