Yep, I'm pretty sure they are Aldans.
But.........is that such a bad thing. If Hall supported them and sold them, can they be all bad. Seems a lot of folks using them that want height adjustment.
They may not be a Koni by design, reputation or quality, but are the Q1's going to be much better given their racing heritage.
Here's what I found when I pulled out the Aldans. Remember these were fitted in 2004 and then a spring rate change was done in 2007 so they were obviously out at that time.
• Front Left - The entire adjustment knob and valve unit is not in the base of the shocker and I can't even see the groove where the circlip sits that holds the valve.
• Front Right - Not too bad, still holding pressure but doesn't seem to be affected by the adjustment knobs.
• Rear Left – No pressure at all.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.