Reply to "Pantera 06927"

OzGT5 (Guest)

Thanks Larry,

Given that my current axles are 40.04 at the bearing end, wouldn't you think thay have been replaced at some time, as I thought factory ones were actually undersize, like 39.99mm?

I'm concerned as to why mine appear to be much thicker in the middle, meaning I'm stretching the bearing somewhat to get over the centre and then going back down to 40.04.

Could the axles be getting thicker in the middle by the tension applied to the nuts?

Are the Wilkinson axles made to really good tollerances in your estimation?

Would it be possible to get a current price inclusive of post to you from Wilkinson as trying to get the time right between the countries is hard.

BTW: I also need that strange bush that sits on the drivers side chassis rail that the gearshift shaft runs through. Mine is so bad it has more than 6mm of sideways movement and I've had to take the finger gate off to allow gear selection of Reverse and first.

4/8/106:32 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...