Reply to "Pantera 06927"

OzGT5 (Guest)

That's great Larry. Vented rears as well. Excellent.

The 121.61053 says that it is a C-Tek standard rotor.

The 120.61053 says that it is a Premium Rotor - Preferred. I take it that they are better in some way?

You used a front Mustang rotor on the rear and found it to work just fine?

So both numbers are from the FRONT of a Mustang?

Measuring my rotors, the height of the hat from face of disc to mounting surface on the front are 36mm yet the rears are 40mm. This 4mm variation seems a lot and I would have thought that it pushed the centre line of the rotor back 4mm in towards the centre of the car?

Your Mustang rotors (as above) show a height of 58.6mm and a Nom thickness of 21mm, therefore giving a 'hat' height of 37.6mm.

1.6mm higher than stock fronts and 2.4mm lower than stock rears.

6/1/105:50 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...