Reply to "Pantera 06927"

jb1490Member

quote:
I'm wondering if anyone has replaced this that could explain any tricks to getting the linkage off, gaining access to the two big nuts and then re-asembling without having to fully setup the shifter linkages again?

I did mine without loosening the large adjusting nuts. I was able to separate the u-joint from the splines. But, as Husker pointed out, this can be difficult unless the splines are clean.

If you can separate at the splines, then the only adjustment that you will have to make is the fore/aft position of the shifter. This can be done by loosening the "pinch" bolt on the shift shaft u-joint. Just make sure that the splines are returned to their original "location".

If any of the shifter u-joints feel rough, the ones from Flaming River are a less expensive replacement than the originals.

http://pantera.infopop.cc/eve/...=890103126#890103126

John

9/15/106:46 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...