Reply to "Pantera 06927"

OzGT5 (Guest)

Has anyone fitted the double row inner wheel bearing conversion?

I purchased these bearings locally and as the new beariing was 12.2mm wider than the original I had a machine shop turn down my spacer tube by 12.2mm to compensate for this.

Both tubes were done and both were the same when completed, but given my problems yesterday, I'd really like to know what the total length of the spacer tube is supposed to be, just in case my RHS has been squashed a bit and this may have contributed to yesterdays issues.

Even if you could tell me what a new standard sparer tube should be, I can just subtract 12.2mm from that and then check mine.

9/17/104:23 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...