Reply to "Pantera #5172 project"

camoMember

quote:
Originally posted by pantera chris:
Go down to your local auto supply and buy a 12volt tester( about $10.00, You are looking to make sure you have + and - current. I know it is frustrating,but, no spark starts at the positive supply into your box or distributor, or resistor.
Follow the current. No current check your GROUNDS, most of the time, a bad ground will be the culprit. Fabrication is much more complicated, you can do it.

quote:
Originally posted by forestg:
Go to the MSD web page and follow their troubleshooting steps.

MSD instructions tested. No spark. I'm still a little uncertain because I really don't even understand what I'm doing with the electrics.

Green and purple wire attached with the jumper and tested also grounding the white wire. No spark from the coil. How do I know is the ignition box or the coil faulty or do I have to buy both to test the system?

5/28/1612:46 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...