Note that the picture in Post 106 is the collector BEFORE modifications to a 2 1/2" tube.
We were concerned about the flow restrictions based on the alignment of the collector. It looked pretty bad!
PS> Goodroc - I decided now is the time to make these kind of changes, so I pulled the assembly and will reverse the bolt. Thanks for the tip.
PSS> Garth - On mine, the alignment looked pretty good when I bolt the bracket right up against the engine block with the two 1/2" bolts. I just decided to fill the space in the back with washers so the bracket didn't deform when I tightened it down. But it makes sense that that spacing is there for pulley alignment. You learn something new with every post (and every time I put that bracket in and out!).
PSSS> Garth - good to hear you engine is going back in.. Did you do anything other than fix the bent pushrods/rockers?
Rocky
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.