Reply to "Pantera # 5357 - Rocky's 1973 L model"

New (to me) ported heads getting ready for machining. These are D1AE GA heads - with the 66cc chambers.

They will get:

  • Minor hole drilling for water flow
  • Hardened valve seats
  • Valve Guides
  • Pedestals machined for roller valve train
  • Painted

    I'll post up some flow numbers as soon as I get them.

    The motor is slowly coming back together. Bottom end is nearly ready for assembly with new flat top pistons, newly machined crank, hardened race bearings, and all other previously installed oiling mods.
  • Attachments

    Images (1)