Reply to "Pantera # 5357 - Rocky's 1973 L model"

rockyMember

Thanks for the compliments!

My 45 minute removal didn't include all the work leading up to it - I'm not really THAT fast!

With regard to "Block and head drillage" - my block has an additional set of holes that match a set of holes in the head gaskets. The holes planned to be added to the heads are "loosely" located where the sharpie circles are.

The machining will certainly be more precise than the circles shown.

Benefits are more cooling of the exhaust port area.

Here is the ZF Fixture mentioned in a previous post, and some shots of the assembly on the stand....

This fixture was welded to a vertical tube (you can see the base of the stand to the far left of the picture - to the left of my shoe). It gives very good access to get the "stack" out of the case...

Fit Check:

Viola!

11/8/156:29 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...