Skip to main content

Reply to "Pantera # 5357 - Rocky's 1973 L model"

Chuck,


Looking great! Two words of advise... If you are using Kirk's engine cover , make sure that your water pump tentioner pulley clears . It sometimes takes some massaging to clear.
Second, you might want to enlarge the three compressor mounting holes in the block. The front two bolts go from 5/16" to 3/8 " and the rear one goes from 3/8" to 5/8" . That is a LOT of weight hanging off of those small bolts!
I once had a block crack along the boss that the rear bolt attaches to and leak coolant.
Ron
×
×
×
×