Reply to "Pantera Electrical Problems"

Pat B; I empathize with what you are going through! Each earlier post is right on the money! About the only thing I can add to what has been said is don't stop at the wire ends when connectors look "OK", or when continuity appears "OK" from connector to connector. The ground wiring in the Pantera is notorious for looping grounds from one relay or connection to the next and making its way back to the ground gang plug, as previously mentioned. Just make sure that when checking continuity, you are getting a good ground from each connector or relay back to ground. I found instances in which the ground overheated, becoming inoperable and created a short in an adjoining wire. Unfortunately, you will also encounter wires to be encased in very rigid plastic sheathing which was once very pliable.