Reply to "Pantera Front Cut"

Gary.
I have had my fibreglass guy make a mould for a RHD dash based on the 73' shape.
He first pulled a lightweight mould from a LHD dash.
Then made a lightweight part out of this new mould.
Cut the part into sections & cut holes in the mould to re-fit the gauge sections back in the mould, but on the opposite side.
Then glass these parts together, lift out, finish the surface of this new created plug & make a new more sturdy mould.
Very cunning as this method retains all of the critical mount points & dimensions so it will be as the original, just mirror image.
Interior wise at the moment will be focused around the RHD conversion.
We tried to make a carbon dash out of the new mould, but as it's a really deep mould its very difficult unless you go to the effort of vacuum bagging.
So I will likely end up with the original trimmed style.

LIV1S
I like your idea of the wall mount mural, that would be a great idea combined with a large background photo of the actual car.
I bet there are very few Pantera front cuts around.

regards,
Tony.