@tsolo posted:I'm curious as to what changed between the original steering column and the new? The mounting tabs on both are flush with the outer diameter of the column. Why is a spacer needed to make the column cover fit? I must be missing something. Some of the pictures at the top of this page are not showing on my screen. I did see in the write-up that the cover needed to be trimmed in places.
I was asking myself the same question while I was making that spacer! And I’m thinking that it should fit the way the original steering column fit because the dimensions are the same. The front bracket is level with the tube as the original one, so the only thing that Would be in the way is the cut out !
I think if I go up in the back by 5 mm, the front probably comes down by 9mm