Reply to "Pantera powersteering… why? which and how!"

LeMans850iMember

@tsolo posted:
Okay, I think I understand now. The original column mounted to the bottom plate with 4 bolts, so the angle was fixed. Now that the rear of that plate has been removed the angle is no longer fixed and you have to set it by the location of the new rear mounting holes. This is good information to have. You need to measure the clearance distance at the front of the column to dash prior to removing the original column. Then you need to match that distance when marking out the new rear mounting holes.
Could you reload the pictures at the top of this page so I could see them?

Steve

you’re absolutely correct! And that was something I did not know…
After enlarge the cutout, it just - well I would not say it fell together - but I gave it one push and then everything was where it supposed be… so now I still have to check the steering itself, so nothing is binding and then have to mark the rear holes..

Attachments

Hide

Images (3)

3/13/244:01 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...