Reply to "Pantera's and Carburetor Geometry"

fastMember

Tom,

I was adjusting the mounting positions at both ends of the throttle cable. The issue at the end near the gas pedal was that the cable was actually sawing into the fitting at the end of the throttle cable mounting bracket. That issue was solved by moving the bracket upward and at an angle that pointed the fitting directly toward the top of the gas pedal where the throttle cable attaches. This made things much smoother, for sure, but the biggest difference happened after the adjustment in the engine compartment. Kid tested, Mother approved!

Jim

3/27/129:00 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...