quote:Originally posted by Edge:
Interesting Comp2.
Can you wind the racks from lock to lock & check the number of turns of the input shaft relative to when the rack bottoms out at either end.
Also total stroke comparison between the Pantera & MGB rack.
The Pantera rack installed is around 2 7/8 turns lock to lock.
Interesting to note that the Pantera does not have a steering stop, just utilises the rack bottoming out on its stroke.
Electric over hydraulic steering, hmmmm interesting.
regards,
Tony.
Tony I measured the two racks yesterday. I had done this before but it has been a long time and I had forgotten the details.
The Pantera Rack:
1 turn = 1.5"
3.25 turns total
4.874" total movement
The MG Rack:
1 turn = 2 7/32"
3 turns
6.625" Total movement
This makes the MG rack a bit too coarse for the Pantera. I am still looking for my notes but the Power rack from MGOC was a lot closer in the ratio.