Reply to "Pedal assembly."

LeMans850iMember

I did measure the clutch master after I took it out… flange to hole and adjusted the new part but the pedal had a… well, not really a hard spot… felt like you “pull a magnet off” resistance… So my guess is that the clutch wasn’t adjusted correctly from the get go! I’m thinking the 2 flat arms connecting to the pedal arm just were not is the correct angle in relation to the leverage of the pedal arm! (Not enough angle)

i turned the rod 2 turns in and now it feels even… No “hard” spot in the beginning!

But needle bearings are in the future!

Next is brake lines, shuttle valve, proportioning valve.. Try to get smart on that…

12/2/2310:12 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...