Reply to "Pilot bearing for Pushbutton Panteras"

There was definitely too much press fit. I fabricated a simple press from 1/8 angle iron and used the flywheel bolts holes to turn the bearing in. The angle iron began to bend so I helped back into place with a hammer and that was it for the bearing. I went to Wilkinson's this morning for a new bearing. This time I filed out the adapter rim, fabricated a new press from 1/4" aluminum, , froze the bearing and greased it, heated the adapter with MAP gas, and tried again. My new and improved press also started to bend so I hit it as well with a hammer while cringing. This time the bearing started to go in. All is well now.

10/25/185:06 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...