Skip to main content

Reply to "Pirelli's 345/35-15 on eBay"

quote:
Originally posted by Joules5:
Doug,

A 345 profile tire has a section width of 13.9" and is for a recommended rim width of 11.5" to 13.5".

I'm running 335/35-17's on a non flared car, so I suspect the tire width is not the issue, just you'll need some wider rims with the correct backspacing to mount them on! Then if you had to get rims, why would you go 15"? Smiler

Julian

Joules, I have the same size tires and wheels as what you mentioned but I had to put spacers under the springs to keep the tires from rubbing. Now the car sits up in the air like a 4x4 and even so, on expansion joints on bridges on the interstate, they will still rub if you are going faster than 70, when you hit them. So I am taking mine back off and lowering the car back down where it should be. About one inch off the deck.
×
×
×
×