Reply to "Piston clearance"

David (Guest)

I know where to mic them, instructions were included. I slid them into the bore and tried the feeler gauge method they are a little tight. I used the micrometer to measure bore and pistons .2" above the bottom of skirt and did the math, they're loose. What's up? I tend to believe the feeler guage and not my micrometers because the feeler guage is consistently binding at 0.003->0.035" at the bottom of the skirt where it should be tightest. This leaves me with just a bit to hone. I get 0.006-.007 by mic/math method.

8/3/031:06 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...