Reply to "Power Window Problems"

markcharltonOld enough to know better and still young enough not to care. My '71 Pantera

Just wanted to add my experience for this.

In my case, I decided to do the Taurus motor conversion because I have the same problem (I suspect). My drivers-side window stopped going up all the way but would go down easily. After I changed the motor out and tested the new Taurus one with a 12v battery, everything worked great. BUT when I reconnect the car power it still doesn't work properly. Seems I've got a bad connection to or at the switch (only DS is affected).

Have you tried connecting good power direct to your factory motors to see if they work? Turns out my original motor was completely fine (although slow as stock ones are) and didn't need replacing. I'm glad I did change it, however because it sure is a LOT faster now. I also did the lowering mod which is a piece of cake and much easier than it looks. It's also a lot easier than changing out the motors is, IMO.

Mark

6/27/101:13 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...