Reply to "Pressure plate 3 finger long style"

...Larry knows of what he speaks!! Right-On Larry!!! That is exactly what I found when I pulled the clutch from my '74L. A 3 forged finger Pressure Plate, Style; Borg and Beck LONG and a 11" disk. I replaced it complete and exact with a Mcloud Plate and Disk. I used a New T.O. Bearing from P.I. All works PERFECT! and with very little effert! I don't like the 'FlimsyNess' of the Diaphram Plates. The 'Multi-Fingers' have been known to wear through; especially if the throw-out bearing is adjusted too tight and drags on the fingers. If you are running a diaphram plate be sure you use the t.o. bearing with a curved face as the bearing with the flat face will not contact the multi-fingers properly all through it's geometry. The flat face bearing is for the pressure Plate with the 3 Forged Fingers...