Interesting that in the build sheet they state that it's a 427, yet, the bore is listed at 4.030 inch and the stroke of the crank at 4.1 inches. For 427 cui. with a 4.030 bore, you need a 4.17 inch stroke crank.
I have a 427 with very similar components to yours, except a 4.17 crank. I run 14 degree initial advance, 34 fully advanced. The limiter is set at 5800 rpm.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.