Reply to "Pulling the transaxle need advise."

I use a 1x6 about a foot long at the back of the oil pan, on the rear flange. The board is about 2 inches longer that the space between the floor and the rear of pan. I remove the side trans mounts and axle flanges. I jack the car up by the rear x member and insert the 1x6, As I lower the car it pushes up on the rear of the motor and holds it there while I slip off the zf, bellhouse and all. I have gotten pretty good at it too! Bill 1362

9/15/117:38 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...