I don't believe anyone will give you a guarantee like that Rocky
I've always heard 'don't race it if you can't replace it'
George, is this still your preferred lobe choice for the mechanical flat tappet Cobra-Pence cam?
Grinder: Bullet Cams
Intake: Lobe #F285/355
Exhaust: Lobe #F295/358
-----------------------------
285°/295° advertised duration
290° average duration
Exhaust valve opening = 85° BBDC
Intake valve opening = 30° BTDC
60° overlap
Exhaust valve closing = 30° ATDC
Intake valve closing = 75° ABDC
------------------------------
250°/260° duration @ 0.050
0.585"/0.590" net valve lift (0.029" lash)
115° lobe separation angle (camshaft degrees)
Intake lobe mathematic centerline = 112.5° ATDC
Exhaust lobe mathematic centerline = 117.5° BTDC
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.