Reply to "Questions regarding George's 275/285 Custom Street Cam Profile"

Thanks George.
I have 4V iron heads. Two sets. I have closed chambers and open chambers. Both have home "porting" where I smoothed things out and cone shaped the valve bosses. I use a Holley Strip Dominator intake, 750 DP carb, Hooker 1 7/8" primary long tubes with 3 1/2" collectors 3" exhaust for the street open headers at the strip.

Rpm peak? I guess that would be up to you. I can shift accordingly. My car goes through the traps at about 6300 - 6400 rpm around 115 mph. Currently I shift at about 7000 rpm.

I have a couple converts also. A 3000 stall lock up Edge and a 3500 non lock Lentech.

I hope this info helps. If not, let me know what you want to know.

I'm looking for a solid roller cam as I have the expensive Crower HIPPO
Lifters already. Also if you have spring specs let me know I have more than my spare
Of springs to pick from.

Thank you
Danford1