@jake posted:Called Bullet Cam back up on this order and made them stick to the profile as George recommended including the 114 deg lobe separation angle.
Thanks for every ones feedback on this.
Jake
Hi @jake, how did the cam @GeorgeP recommended work out for you? I'm new to the Pantera community and I recently got a Comp Cam 280h to see how it works out in my Pantera. It has Closed Chamber 4V heads, and flat top pistons. I'm going to test it out and if I don't like it, I'm going to order the one George recommends.
Cam Style:
Hydraulic flat tappet
Camshaft Use:
Street/Strip
Basic Operating RPM Range:
2,000-6,000
Intake Duration at 050 inch Lift:
230
Exhaust Duration at 050 inch Lift:
230
Duration at 050 inch Lift:
230 int./230 exh.
Advertised Intake Duration:
280
Advertised Exhaust Duration:
280
Advertised Duration:
280 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.530 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.530 in.
Valve Lift with Factory Rocker Arm Ratio:
0.530 int./0.530 exh.
Lobe Separation (degrees):
110