Reply to "Radiator cap for the stainless swirl tank"

tsoloMember

My system is all new. Stainless tubes, green stripe hoses(Napa sells a yellow stripe version that is the same thing, cheaper, and by the foot if you need a section or two), Fuidyne radiator, heater hoses, Edlebrock water pump, FlowCooler (Robershaw) 180 t-stat, SACC fast waterpump pully, twin 12" Spal fans, and the PE fan controller. I should be good to go but the cap does not hold at the rated 15psi (sticker on top of it). It was sourced from Tara a couple of years ago and says Dex Cool only. I am assuming this is a GM cap because of the Dex Cool lable. I'm curious what you other guys are using with your stainless tanks? And have you tested your cap?

Steve

2/21/1411:25 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...