My radiator journey starts with no problem increasing to a gallon on the floor. Naughty girl.
It gets understandable once the old copper radiator is out. There is a spooge repair down in the corner.
I went with the fluidyne solution. I found the same delivery problem. Bent mounting ears.
There was equal treatment for both ears.
Bent em back with wood blocks, table vise, and then c clamps. Attle be arrrite. On on to mounting fans. Also… the recommended dual fan enclosure from this list is no longer available. I will pop rivet some brackets. I figure aluminum on aluminum might corrode less. Use that flange around the edge. Reuse the bracket you can see in the spooge picture.