Reply to "Radiator fittings"

zr1panteraForum Sponsor - SACC Restorations

quote:
A) Should I crimp the tube on the pipe, put on a fresh piece of hose and clamp on a plug, or weld up the end of the little tube?
B) Guess I will be discussing the bleeder valve. . There ARE two threaded opening on the right side. The one in the lower right would ne for the drain, so may the intent of the other is to have the customer fit one.

A) If you get new coolant tubes, the small tube for that little hose is eliminated so you are good to go with that setup.

B) If there is a bung at the top of the radiator, it is likely there for the bleeder. The bung should be at the highest point of the tank.

3/5/139:03 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...