Thanks guys! As usual, you all are awesome.
I have been talking to Tara Hall and can get the radiator, but for whatever reason they can no longer get the Mirriah fans/blades. So before I buy a radiator, I need to source some new/very lightly used fans or modify their radiator. The Hall radiator does not have enough clearance between the rear of the radiator and the outlet/inlet elbows to allow for my current Flexalite sucker-style fans, so my only options are:
1. Get new Hall radiator elbows extended to give the clearance needed to use my existing fans (modifying the current wiring to utilize new temp sensors in radiator and remove load from ignition)
2. Get new front mounted pusher fans/blades (whether Mirriah/Spahl/etc.) and do same wiring upgrades with new Hall radiator.
What's your opinion? If #1, any drawbacks to extending the elbows or otherwise except it would be using older fans? If #2, anyone have a set on new/near new Mirriah's? If Spahl, which and why?
I have decided not to go with the 45degree lay-down style radiators some have suggested for aesthetic reasons.
George, I see now that the pic above does show that the fans/ring are attached - my bad.