quote:While you are at this task, are your lower a-arm shafts freely rotating? That shaft often freezes and is a BIG hassle - just ask Bill (last push button) who just had that fun chore.
The lower shafts were nicely greased and the long bolt came apart easy.
Damn tight fit between the chassis uprights though. I thought at the time what fun this will be to reassemble.
Is there a thin thrust washer that goes inside of those large cups. There were two thin washers with grease on them left on the deck of the hoist once I had it apart. I looked indide those end caps and there looked to be a place for them, but better to check with you guys.